Author Topic: Engine preheat leak resolution  (Read 1508 times)

Bryan Beamon

  • BAC Member
  • *
  • Posts: 361
  • Thanked: 133 times
Engine preheat leak resolution
« on: August 07, 2020, 02:45:20 PM »
After 4 on the road repairs of the engine preheat hose we took our coach into Elite RV repair in Harrisburg, Oregon. They originally thought they had to run two new 30 foot heater hoses but discovered that Monaco had used a product call tuff pex along the frame rails and only had to replace 2 three foot sections of hose with a silicone heater hose. Not sure this problem will impact anyone but might help someone in the future.
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1230
  • Thanked: 359 times
Re: Engine preheat leak resolution
« Reply #1 on: August 07, 2020, 03:06:28 PM »
Eric and Mark at Elite RV have fixed the ol' Beaver several times over the years. This year they changed out our alternator on short notice. Glad they could help you out!
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."