Author Topic: HWH 6 soleniod block  (Read 2618 times)

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
HWH 6 soleniod block
« on: September 04, 2020, 02:39:09 AM »
    Greetings Folks,
I am in the process of fixing air leaks in my leveling system. The part number on the side of the block is AP 11239. I am looking for the O-ring kit for both blocks. As I recall, Mike Shumack rebuilt his blocks about a year ago. Maybe someone has the kit part number and how long to receive them. Thanks for your help, Fred
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: HWH 6 soleniod block
« Reply #1 on: September 04, 2020, 03:09:44 AM »
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!
The following users thanked this post: Fred Brooks

Mike Shumack

  • Guest
Re: HWH 6 soleniod block
« Reply #2 on: September 04, 2020, 05:33:04 PM »
I replaced all the o-rings in my rear HWH units (Tag and Drive axle 6-packs).
Oddly, HWH only sells two of the tree o-rings needed to reseal these.

I found an article on rebuilding these valves on the old Foretravel site, and used the part numbers he provided. I ordered from Grainger.
I have plenty left over. If you want I can send you some - or if it's easier/faster, order on-line from Grainger (you have to get 25 or 50 minimum, depending on size, if you order from them).
The following users thanked this post: Fred Brooks

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
Re: HWH 6 soleniod block
« Reply #3 on: September 04, 2020, 10:45:20 PM »
   Thanks Mike, my local parts supply house had all of them in stock. The issue on my block was corrosion on the aluminum block. There is about .001 gap between the aluminum block and the brass housings that screws into it. Salt water got into that gap and the corrosion migrated under the outer o-ring. A little 600 wet and dry sand paper dressed that. 20 years and 80,000 miles keeps us rubbing on Her to keep her purring.
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
Re: HWH 6 soleniod block
« Reply #4 on: September 04, 2020, 10:47:21 PM »
Forgot the picture
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6