Author Topic: Engine preheat leak on top of motor  (Read 1820 times)

Bryan Beamon

  • BAC Member
  • *
  • Posts: 370
  • Thanked: 134 times
Engine preheat leak on top of motor
« on: September 07, 2020, 11:48:05 PM »
The 2 heater hoses that run across the top of our Cat engine had to be replaced due to a major leak of coolant. Peterson Truck in Eugene Oregon finally found the connection where the rubber heater hoses terminate into a ridged poly hose along the coach rail. The coach had to lifted and the drive line removed to access the connection destination. I am attaching a picture where the approximate location on the coach rail the connection  point was located.
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden
The following users thanked this post: Scott Shearer