Author Topic: Powered chair leg lift  (Read 1777 times)

Barbara Olmstead

  • BAC Member
  • *
  • Posts: 2
Powered chair leg lift
« on: September 18, 2020, 09:34:33 PM »
The passenger chair powered leg support just quit...will not go down or up. Motor hums, but nothing happens. All other power buttons on the chair work. This is an '07 Marquis.

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3510
  • Thanked: 2694 times
Re: Powered chair leg lift
« Reply #1 on: September 18, 2020, 11:06:40 PM »
Barbara,
It would be helpful to know what year and model coach you have. If the furniture is made by Villa, the passenger side footrest was  known to fail due to the drive mechanism becoming disconnected from the motor. This could also happen with Flexsteel units but not as prevalent.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

Carl Boger

  • BAC Member
  • *
  • Posts: 435
  • Thanked: 132 times
Re: Powered chair leg lift
« Reply #2 on: September 19, 2020, 01:26:05 AM »
Mine quit working a while back, and would not move.  I could hear the motor try to move it but it was like something was jammed keeping it from opening.  I took the chair out and the gear box on the motor had become inoperable.  The grease inside had hardened and it would not allow the gears to turn.  I took it all apart and thoroughly cleaned everything and re-greased the gears.  I won't say that it is better than new, but it does now work. Maybe almost as good as new.
Carl

98 Beaver Patriot Savannah
330 hp Cat 3126