As part of the project to replace my old Kenwood head unit, I want to install a power amplifier. In cars, the amplifiers are typically run directly to the car battery but doing that in a coach is going to prove to be difficult at best.
For reference, the amplifier is relatively small and the power wire is only 8-gauge.
My question is.... Can I wire the amplifier directly into the electrical bay? Looks like there is at least one power wire that likely runs directly to the battery or distribution after the battery. That wire is larger than 8-guage and feeds into what looks like a solenoid which likely enables power to accessories when ignition is powered on.
Fairly sure this won't cause any problem but thought I should reach out to some of the long-time coach experts here.
Thank you!!!!