New Zantrax 3012

[Paul Bedoe]

Had a cable go and ruined my 5 agm 200ah batteries.  So switched them out with lithium.  In for a penny in for a pound have a little down time so I also upgraded my 2000 w zantrax to a 3000 w pure sign wave.  I was going to use my same wire for the keypad but I with the bus adapters I could not get the damn thing to work… however I hated the location above the entry door so I ran a cat 5 to the bathroom and a much better location now I can take a crap and adjust the settings 🤣

[Bill Lampkin]

I just replaced my inverter and used the little adapter thingys on both ends of the Xanbus; worked first time.

[Paul Bedoe]

My old keypad worked fine I don’t know why the adapters did not work ?  I put the right colors on the ends.  With the cat 5 both my new keypad and ags link up and work fine …

[David T. Richelderfer]

Paul -

Certainly, as we get older, we look for more multi-tasking methods to get more jobs accomplished quicker and easier... whether in the bathroom or elsewhere.  I must say I appreciate your humor; you had me chuckling.  Regarding the location of the Xantrex remote, I like its location being above the co-pilot's seat because I can check the inverter's charging voltage, and on the Aladdin at the same time with a turn of my head, I can see both the house batteries' and chassis batteries' charge status.

[Paul Bedoe]

It seemed every time I checked it my step was in and I reached and looked up for me it was awkward and inconvenient.  …..

[Joel Ashley]

Oh, thank g.  We can use the “C” word on the Forum.  Yay! 😁

🤭Joel