Mike
Thanks for the tip. I did find an overload switch located on the firewall of the coach inside the generator slide out behind a bundle of wires. It has a manual reset lever. Once I reset the switch everything worked fine. I think since the coach was not exactly level, this put the motor in a bind, causing the overload to trip. I have tried the slides since, and everything is working great. I am not sure why they placed the manual switch in the generator slide, because if the switch trips while sliding out the living room slide or the dining room slide, you would have to bleed the generator slide hydraulic oil line, in order to pull out the slide to reset the switch. I learned to slide out the generator slide first in order to access the switch if this would happen again. Thanks again Mike. ( Sorry for the late response )