'05 Monterey - The 8-pin water pump switch in the water bay works to turn the pump on and off, but the indicator light in the switch does not illuminate. Found two wires with connectors behind the bulkhead that are loose and not connected to anything. Expect that they need to be connected to the switch as well to power the indicator light, but after looking at switch diagram I am still not sure to which terminals those wires should be connected. One connector has two red wires in it and the other has a single white wire. Looking at the switch from the back, all the pump wiring is on the left side of the switch and there are no wires on the right side. Figured that the forum members could furnish the answer. Would appreciate some guidance on this matter. Thanks!