Surge Protector & Inverter

[Jerry Ward]

I have a 2008 Beaver Contessa with a hard wired Progressive industries Surge Protector.  It started making a very loud noise a couple day's ago and I ordered a new one through a local RV shop over the phone.  The Magnum Inverter on the wall is displaying a red light (fault).  I have tried resetting the inverter by holding the button on the panel but it does not clear the red light.  It also display's a code 0A.

Any thoughts?

TIA

[Steve Huber Co-Admin]

Jerry,
Check your inverter remote manual for the code description. My guess is that AO may mean AC Overload but most remotes spell out the words.
Steve

[Eric Maclean]

Jerry
I believe Steve is right about the code .
I have had a code that wouldn't clear from the panel and finally got rid of it by unplugging the shore power and disconnecting the batteries for five minutes .
It worked but you have to reset the panel setting clock etc when done.

[Jerry Ward]

I am still looking for a manual.  I have it unplugged from Shore Power and still cannot clear the error.  On a 2008 Beaver Contessa, where is the inverter located?

[Eric Maclean]

Jerry
You have to disconnect the battery bank to get the inverter to do a hard reset

What model inverter do you have.