General Boards > Technical Support

Level jack pump

<< < (2/2)

Eric Maclean Co-Admin:
Chuck
Mine is mounted vertically as well .
With a light you may be able to see the vent plug by looking from the battery bay .
As I mentioned before the vent is on the top of the reservoir where the pump motor mounts to the reservoir.

Eric

Carl Boger:
Chuck,

Mine also has a allen head plug with out the plastic cover.  Hard to get in there,but a long thin funnel or a large syringe work for me.  I have not had to add any fluid in the last couple of years.  When it started loosing fluid I had all 3 jacks rebuilt as well as at least one new valve.  Hopefully it will be problem free for a long while.

Chuck Hurd:
If I can fill it from there it is easy to get to I’ll just have to get a small pump and hose. I know it’s low because the alarm goes off when going down hill. Thanks for the info.

Eric Maclean Co-Admin:
Chuck
If your going to try to fill it from the plug in the side of the reservoir take that plug out slowly to make sure it is above the fluid level or you may have a mess to clean up.

Eric

Navigation

[0] Message Index

[*] Previous page

Go to full version