General Boards > Technical Support

Marquis high gloss wood finish

<< < (2/2)

Devin Ginther:
We own a custom woodworking business and do very high end stuff. 

It is pretty easy to reproduce the gloss finishes on our Beavers.

Lacquer is one choice.  Get DEFT lacquer in a spray can.
 Sand with 800 grit between light coats.  Build it up.   

Better choice is actually a polyurethane.  Gloss.  Same look.  800 grit between coats. 

Best choice would be a catalyzed conversion varnish. 

Bill Lampkin:
I used 8 coats of Watco spray (rattle can) lacquer. sanded with 320 before last coat. Have heard that buffing with a paper bag will bring out the gloss. Whaddya think?

Navigation

[0] Message Index

[*] Previous page