General Boards > Technical Support

SID 33 Error Code Fan Clutch Output Device

<< < (2/2)

Jeff Lynn:
Frank, thanks. I will look for the Wax Valve.

Jeff Lynn:
I just changed the hydraulic filter and reset the indicator button and now with less than 1 hour of engine run time the button is up again. What could be causing this pressure issue?  Could it be the Wax Valve

Scott Shearer:
Jeff,

Check out this post and see if it might be helpful.
https://beaveramb.org/forum/index.php/topic,8084.msg55965.html#msg55965

Also, search the forum for 'MP Filtri', you’ll find several posts related to hydraulic filter clog indicator tripping issues.

-Scott

Jeff Lynn:
Will do. Thanks Scott

Navigation

[0] Message Index

[*] Previous page