General Boards > Technical Support
Steering Column Cover removal
Steve Huber:
Where did the "unused" DRL connector come from? Is it the OEM unit or one added by the PO? The DRL relay is 20, above VCC in the lower right section of the PCB.
Roger Milne:
--- Quote from: Steve Huber on October 30, 2025, 02:26:38 AM ---Where did the "unused" DRL connector come from? Is it the OEM unit or one added by the PO? The DRL relay is 20, above VCC in the lower right section of the PCB.
--- End quote ---
It looks factory. I'll take a pic tomorrow.
I'm trying to get pics of the wires and numbering uploaded after I get them resized to be able to view on this page.
Roger Milne:
Here’s some pics of the wires from the steering column to the P6 connector.
Roger Milne:
Hey Steve,
Here’s the DRL connector. I assume this was factory install.
The other pic is the make shift headlight and wire pin connectors. Which I’m not sure if those flat pin connectors are factory or not as the headlights are after market.
Steve Huber:
Roger,
Looks like the PO really messed up the wiring from the looks of his DRL hack. Best bet seems to be to continue to see if you can locate cause of the low beam short as we've been discussing. Once that is resolved you should be able to straighten out the remaining mess.
Steve
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version