General Boards > Technical Support

No Air Pressure??

<< < (3/3)

Roger Milne:
Thanks Eric, I was actually going to put it back together and run it so I can try and determine where the leak is. It was a "in the field" repair, so I knew it was leaking, but not exactly where. This link might actually help.

Roger Milne:
So I figured I’d close this thread out by telling you what the end result was. While the source of the leak was at the air dryer it turns out it was the turbo cut off valve that had fractured inside and was failed in the open position. A quick search found a replacement kit from Napa for $60 and 15 minutes of work the kit was replaced and air leak fixed, problem solved. I appreciate everybody’s help in trying to diagnose the problem.

Navigation

[0] Message Index

[*] Previous page