I'm hoping to find a part number for the dash air receiver/drier for our 2000 Monterey Sea Cliff. Guessing it's an Acme unit, but there's no part number. The build date is 9/99, but it's titled as a 2000. The drier is approx 7" tall and 2 3/4" in diameter with male threads. I'm not sure of the thread size. I'm guessing if I replace it with a similar size, it will work. I was going to drill the bottom of the old drier to get an approximate amount of PAG oil to add back into the new drier. I'm guessing I'll be okay with PAG 46, but I'd like to make sure. There was only a high side coupler behind the firewall, but I did find a high and low port a couple feet in line from the compressor on the frame rail. Any suggestions would be greatly appreciated!
Brian
