General Boards > Sources for Suppliers, Parts and Maintenance Materials

air horn front cover

(1/2) > >>

Don Schobert:
I have a 2007 Beaver Contessa and one of the air horn covers (plate) with a Beaver on it has been lost.  Does anyone know where i can find a replacement to crimp on the air horn?

Don

Edward Buker:
I would try Beaver Coach Sales...I think the horn may be made by Hadley.

Later Ed

Joel Ashley:
Northwest RV Supply in Eugene Oregon, is known for having hard-to-find parts like that.  If Monaco had some left over, NWRV may have scarfed them up.

http://nwrvsupply.com/

Joel

Keith Oliver:
If the front end of the horn is rectangular, approx 4" x 8", with a square back end, it is by Hadley. The logo is on a rectangle that occupies about 2" x 4" centred on the cover plate.
If the front end of the horn is rectangular, approx 3" x 6", with a round back end, it is by Fiamm.  The logo is a "peel and stick" beaver, stuck to the cover plate.

Most older Beavers have Fiamm horns, to at least 2003.  I have only seen one newer (2005 to 2008) with Hadley.  This in a park with 18 different Beavers, where we stayed for the past month.

I replaced my Fiamms with Hadley to get more volume.  I too would like to have new beaver logos, so if you find a source, please post it.

Don Schobert:
Thanks for the suggestions.  We talked to Northwest RV and then to Beaver Coach Sales.. Beaver Coach sales gave us the part number but we have not had an opportunity to try and track it down.  If we find either the horn or the stick on Beaver, we'll let you know.  thanks don

Navigation

[0] Message Index

[#] Next page