General Boards > Technical Support

HYDRO HOT FLUID LEVEL CUTOFF SWITCH

<< < (2/3) > >>

Richard And Babs Ames:
Where are you at in FL?

 North Trail RV, Ft Myers had a great well versed Aqua Hot tech and he was training someone on ours when I had annual service done a few years ago. Our last one was done by a "mobile" Aqua Hot reccomended tech and was a not very good and cost 30% more and took two tries to get it right.

Alliance Coach (old Camp Monaco in Wildwood) might also be a good choice and you would be supporting our advertisers.  Then there is always Lazydays which has good techs and a $120 per hour labor rate.  They may have one of the older better switches.

Orman Claxton:
George
Were the replacement switches Brass or the black plastic? I know you live in another part of the country, But I am a Factory trained/Authorized service Tech. Please feel free to contact me at any time. If you are in Quartzsite, Az. next week, contact me. I see no reason why those switches should fail like that.
I have been informed that Vehicle Systems has a replacement  switch which is electronic, sopposed to be an exact  replacement.
Orman Claxton
206 660 9893
Ocroadhouse@yahoo.com

George Harwell:
Thanks for the info guys. After discussions with Aqua Hot and Orman I will order the float with the brass head. Hopefully it will be more durable. I already have training on replacing it so won't take long. HAVE A GREAT DAY!

Gerald Farris:
For anyone with fluid level switch problems in a Aqua-Hot, here is the link to a detailed instruction sheet on replacement.

http://www.rvhydronicheaterrepair.com/Downloads/How%20to%20Replace%20the%20Float%20Switch%20on%20Aqua-Hot.pdf

Gerald

Marty and Suzie Schenck:
Thank you Gerald, it's been saved along with the service manual in the laptop. Marty

Navigation

[0] Message Index

[#] Next page

[*] Previous page