We had a roof leak and after much soul searching and roof inspecting and sealing of clearance light lenses. I discovered that the black sheath through which all the wires for the OTA antenna runs, had a hole in it and was allowing water to travel back down the sheath, through the boot and into the roof. It then followed the wires to the AV cabinets and so on.
At this point it occured to me that there should only be te coxel cable there anyway. Aparently someone has run two insulated 16 ga. wires up through the pasage and cut the boot on the mount base. These wires are attached to the antenna support pole via a hose clamp.
Anybody got any idea what thos wires are for?
Keith