Author Topic: IDS Leveling system won't retract  (Read 19299 times)

Edward Buker

  • Guest
Re: IDS Leveling system won't retract
« Reply #30 on: May 21, 2014, 09:06:39 PM »
Bill,

Thanks for this, you always think that hydraulic issues are primarily valve mechanical or pump issues. This is a good find. I am not sure our compartment electrical layout is exactly the same but this is an excellent starting point. What was the label for this relay on the wires or from a diagram on the door if you had one?

Later Ed

Bill Johnson

  • Guest
Re: IDS Leveling system won't retract
« Reply #31 on: May 21, 2014, 10:26:15 PM »
Hi Ed,
On our door, the electrical diagram lable is:  K8, Bypass Relay.  Hope this helps.
Bill

Les Brandt

  • Guest
Re: IDS/SMC Leveling system won't retract
« Reply #32 on: May 03, 2015, 12:36:42 AM »
Decided to start a new thread with my problem instead of resurrecting an old thread.

See new thread "SMC Leveling System Won't Retract" if you can help me.
« Last Edit: May 03, 2015, 01:10:42 AM by Les Brandt »