General Boards > Technical Support

3-M Protective Film

<< < (2/2)

LarryNCarolynShirk:
Last October, I had the 3M removed from part of the front bumper of my coach by Richard Boatman at Bend RV Repair.  It was a strip about 6 inches high the width of the coach.  They used a heat gun, and just peeled it off in less than an hour.  I plan to remove the product above the front windshield myself.  

Larry

Jerry Pattison:
Now I don't feel so bad about that dang armor on the front of the Diamante!!

Jim Bentley:
Mine was severely cracked and the only way it would come off was scraping.  I use plastic scrapers with a spray on product called De-solve-it.  I bought it at Ace Hardware it is  user-friendly and you don't have to use gloves.  It probably took me four days to remove working four to six hours a day. Good luck

Navigation

[0] Message Index

[*] Previous page