General Boards > Technical Support

VCR Removal from Patriot

(1/3) > >>

Bob McCORMACK:
Need some help here.  I am replacing the original TV and VCR in my 96 Patriot. For the life of me I can't find any way to remove the VCR.   There is no access from under, above, behind, left or Right.  The front is not removable and the unit is clearly attached some how.   It is as if they mounted it in the cabinets before mounting them.   Any one have an idea how this thing comes out short of cutting up the cabinet.

Racer Bob

Marty and Suzie Schenck:
I don't know about yours, but my 98 Monterey's VCR was held in by a velcro strap. I had to slide a flat object (a ruler) on top of the VCR and catch the end of the velcro strap and wiggle it loose then pull the VCR out. It was a real bugger to get done. Hope that helps. Marty

Keith Moffett Co-Admin:
Hi Bob
Our 98 Patriot has a vent cover on the underside of the cabinets.  I know there is access to the connections there.  Do you have one and is  there perhaps a tie down in yours?

Bob McCORMACK:
I will look for the velcro thing which would make the only sense.   The VCG compartment is double walled off from the compartment next to it that has access through the vent.   There is absolutely no physical access to the compartment with the VCG.  I'll will report back tonight.

Racer Bob

Bob McCORMACK:
I will look for the velcro thing which would make the only sense.   The VCG compartment is double walled off from the compartment next to it that has access through the vent.   There is absolutely no physical access to the compartment with the VCG.  I'll will report back tonight.

Racer Bob

Navigation

[0] Message Index

[#] Next page