« previous next »
Pages: [1]   Go Down

Author Topic: Ladder bracket  (Read 9086 times)

Michael Marcocchio

  • Guest
Ladder bracket
« on: September 19, 2014, 03:58:50 PM »
Hello everyone could someone tell where I can get a Beaver plack ladder bracket. Thankyou
Logged

Roy C Tyler

  • Guest
Re: Ladder bracket
« Reply #1 on: September 19, 2014, 04:38:45 PM »
Is that for the yellow ladder you are going to hang on the back?  

BAC Logo Plaques for Your Coach
Chuck Rendall: 818-360-8618
Email: c.rendall@earthlink.net

You can get the ladder brackets from FMCA.  Check their monthly magazine for information.
Logged

Michael Marcocchio

  • Guest
Re: Ladder bracket
« Reply #2 on: September 19, 2014, 04:52:47 PM »
Hello  lol lol I would never hang a yellow or green ladder on my coach it is the plack brackets I am looking for Thanks Roy got the email.
Logged

Gerald Farris

  • Guest
Re: Ladder bracket
« Reply #3 on: September 19, 2014, 05:40:09 PM »
Michael,
I think that Chuck has the brackets to attach the plaque to your ladder also. His complete contact information is on page two in Beaver Tales.

Gerald
Logged

Joel Ashley

  • BAC Member
  • *
  • Posts: 2455
  • Thanked: 771 times
  • OSU Class of '73, Oregon Native. RVing 40 years
Re: Ladder bracket
« Reply #4 on: September 19, 2014, 05:47:33 PM »
If you are talking about the brackets for mounting an FMCA, Good Sam, or BAC or other "goose egg" on your ladder, the eggs and brackets and other related paraphanalia are made and sold by Kiley Mold Company, as promoted in club literature:  http://www.kileymold.com/products.html

I have 4 plaques on my coach, only one of which is on the ladder.  I made aluminum brackets for the other 3 and mounted them on the engine access door louvers in such a way that the brackets are unseen and the plaques don't really interfere with air flow through the compartment.  I did that for two reasons;  on the street side they are more visible to others on the highway, and they're never in the way when I use the ladder.  If you'd like pix of the installation I can supply some.  ;)

Joel
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Steve Huber

  • Administrator Group
  • *
  • Posts: 3708
  • Thanked: 1607 times
Re: Ladder bracket
« Reply #5 on: September 19, 2014, 06:22:35 PM »
Joel,
I'd be interested in the pics.
Thx, Steve
Logged
Steve
Coachless
2015- 6/24  07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

Joel Ashley

  • BAC Member
  • *
  • Posts: 2455
  • Thanked: 771 times
  • OSU Class of '73, Oregon Native. RVing 40 years
Re: Ladder bracket
« Reply #6 on: September 19, 2014, 07:43:50 PM »
OK, but you'll have to excuse that the coach has been sidelined for a very long time and needs a bath badly.  I also note from taking these closeup pix that some of the nuts I used that were supposedly corrosion proof, mostly brass, have rust stains.  Looks like maybe a steel washer snuck in somewhere.  

Will have to stop working my rear off on the stick-built and pay more attention to the Beav I reckon!

Joel
Logged
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat

Bob Jae

  • Guest
Re: Ladder bracket
« Reply #7 on: September 20, 2014, 01:17:14 AM »
Very nice thanks for sharing
Logged
Pages: [1]   Go Up
« previous next »