jacks

[Dave Blystone]

I have the jacks that go to the axle  they have always worked with no problem
I brought them  up at wildwood fla and the light said all up
 but I think the passenger front didn't go all up when I hit a bump I could could feel it hitting any ideas??
im going to bring in the room and bring up the jacks and check the oil level fill the pump and cycle the jacks a few times to see if that helps
dave and edie blystone
2001 33 patriot
2014 ford flex

[LaMonte Monnell]

I had a problem with mine creeping down sometimes and setting the alarm horn off....I just cycled them to up and were ok.....

but I have them no more...air system only since July 7th...hooray!

[Gerald Farris]

Dave your plan should work. Sometimes one of the solenoid valves do not seat properly, and allow a jack to creep down a little or it is possible that the jack was never all the way up. Your plan should correct either/both problems. However, if the problem keeps reoccurring, you will probably need to replace a valve.

Gerald

[Dave Blystone]

thank you for the information
I cycled the jacks up and down 2 times today  added about a half qt. of fluid
guess I find out mon morn when I leave here to go to lazy days for a few days
2001 patriot 33
2014 ford flex
dave and edie blystone

[Edward Buker]

Dave,

The all up signal can be false if any one of the push button switches sticks in the pushed in position. I have replaced two of mine for sticking in the up position. They are wired in series and when all are pushed in the all up signal is generated even while a jack is not fully up.

Later Ed