General Boards > Technical Support

Keyless entry

<< < (2/2)

Roger Bowton:
We have tried the the 1/2 and the 9 that our manual says and neither will unlock the bay doors from the keypad.  There was a new keypad installed at Lazy days, could there be a requirement to reprogram something and if so how do I do this?

Thanks

Joel Ashley:
Did you try resetting the box under the dash referred to earlier yet?

http://forum.bacrallies.com/m-1268691876/s-1/highlight-magnadyne+door+lock/#num1

Also, the webpage below has a link to an owner's manual.  If it is for yours or a similar Magnadyne keyless entry, it has full programming instructions.  But it doesn't say anything about resetting the control box under the dash;  you'll have to go by the above Forum thread's information for that, or contact Magnadyne off their webpage, Beaver Coach Sales Bend Service Center, or Lazy Days.  I didn't see our keyless entry model on Magnadyne's website, but imagine programming is similar.

http://www.magnadyne.com/index.cfm?MasterAction=Item&InvMasID=25261&Web_CatID=308

-Joel

Navigation

[0] Message Index

[*] Previous page