Author Topic: Torn slide seals solution  (Read 3639 times)

Bryan Beamon

  • BAC Member
  • *
  • Posts: 366
  • Thanked: 133 times
Torn slide seals solution
« on: June 26, 2015, 05:40:49 PM »
Recently I repaired a torn slide seal with a product recommend by Monaco called loctite 401 super glue. I found it at an industrial  supply in Eugene Oregon. The product is expensive but works exceptionally good  on rubber. Monaco called the product a super glue on steroids
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden
The following users thanked this post: Joel Ashley

Richard Higley

  • Guest
Re: Torn slide seals solution
« Reply #1 on: June 27, 2015, 03:39:08 AM »
I have a slide seal that has a tear in it. Where can I get some?  Thanks

Joel Ashley

  • BAC Member
  • *
  • Posts: 2344
  • Thanked: 801 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat
The following users thanked this post: Carol Moffett

Richard Higley

  • Guest
Re: Torn slide seals solution
« Reply #3 on: June 28, 2015, 05:42:10 PM »
Thanks Joel.