Author Topic: Genset Hour Counter in Info Center  (Read 2998 times)

John Bagwell

  • BAC Member
  • *
  • Posts: 62
  • Thanked: 18 times
Genset Hour Counter in Info Center
« on: July 27, 2015, 10:49:13 PM »
My genset hour counter has stopped moving and is stuck, and will not record now when generator is running.  Any ideas on getting it unstuck.

Thanks for the help.

John
John Bagwell
2001 Monterey 36ft.
CAT 3126B
Toad. 2020 Ford Ranger

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
Re: Genset Hour Counter in Info Center
« Reply #1 on: July 28, 2015, 12:18:05 AM »
           John, I have some spares, send me the dimensions and I'll see if I have one.

                     Regards, Fred
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6
The following users thanked this post: John Bagwell

John Bagwell

  • BAC Member
  • *
  • Posts: 62
  • Thanked: 18 times
Re: Genset Hour Counter in Info Center
« Reply #2 on: July 28, 2015, 01:57:10 AM »
I will measure tomorrow, and let you know. 
 
Thanks,  John
John Bagwell
2001 Monterey 36ft.
CAT 3126B
Toad. 2020 Ford Ranger

Fred Brooks

  • BAC Member
  • *
  • Posts: 1617
  • Thanked: 749 times
  • RVIA Certified Luxury Technician 49 years, Retired
Re: Genset Hour Counter in Info Center
« Reply #3 on: July 28, 2015, 02:38:07 AM »
      Hi John,
  Does it look like this?  Face is 2" wide x  1 1/4' tall x 2" deep with 2 male spade connectors.

               Regards Fred
Fred & Cindy Brooks
2000 Marquis, Jasper
C-12 Wild Cat (U of A)
2014 Honda CRV
Proverbs 3: 5 & 6
The following users thanked this post: John Bagwell