Slides will not go in or out

[Jan Scherpenzeel]

 We have an 06 patriot 44ft Saratoga lV, with 4 slides, the slides won’t go out or in,when you push the button all you hear is a click under the entry step area. One slide is out and three are in. Is there a fuse or reset? And where is that located? Thanks for any responses, Jan

[Gerald Farris]

Jan,
There is no reset, but there probably is a 400 amp fuse in the battery compartment. But the easy way to determine the source of your problem is to take a meter and check the voltage at the solenoid on the hydraulic pump for the slides. If you have 12V on one of the large terminals, the fuse is good. If you have 12V on both large terminals when the switch is pushed, your switch and solenoid are good, but you have either a bad connection at the motor for power or ground or a bad motor. If you need more help in diagnosing the problem, just call me (713-254-4156).

Gerald

 

[Jan Scherpenzeel]

Thank you sir, I will check the voltage and go from there. Jan