General Boards > Technical Support

Fresh water indication

(1/2) > >>

William Mathews:
The fresh water has stopped indicating how full it is. The black and gray indicate ok. I found the telephone wire where it hooks to the tank, but is that the sending unit it is hooked to? If that unit is bad, where do I get a new one and what does changing it involve?  Thanks for any help.
Bill M
03 Contessa

Larry Fisk:
If you have the Aladdin system they no longer make parts for it. Luckily I did find a used tank interface module at Northwest Supply in Oregon. That was the only place that had one and I checked at several places. I think I would check the wire for the fresh water tank first. You should be able to see if it's giving an indication in the calibration mode of the Aladdin I think.

Larry and Heidi Lee:
Bill, I have a brand new tank interface module if you need it. It was around $100 but anyone can have it for $60.00. I have a See Level system so I will never need it. Otherwise good luck!

Jim Gill:
Larry
Does the See Level system work well  and is it an easy replacement for the Alladin system?
Jim

Larry Fisk:
Hey guys, excuse me for interjecting but I believe that the sea level system still depends on the Tank Interface Module to work properly. Unless of course you totally installed their system. That is what the Sea Level Tech person told me at the FMCA Rally. He said if your tank interface module is not working properly than their system will not function. Anyway it's something you might want to look into.

Navigation

[0] Message Index

[#] Next page