Author Topic: Replace Vanity lighting  (Read 5589 times)

Darrell Terry

  • BAC Member
  • *
  • Posts: 167
  • Thanked: 15 times
Replace Vanity lighting
« on: April 14, 2017, 05:44:18 PM »
I would like to replace the vanity lighting on our 04 Monterey.
The existing lights are an unusual size ( 16" x 3" )  and I haven't found anything that fits.
Has anyone replaced these lights and what did you find that fits and covers the 3 attachment holes and the 1" electrical hole.
I would like to replace with LED but will consider incandescent as well.
Thanks in advance,

Darrell Terry
2004 Monterey
350 Cummins ISC

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Replace Vanity lighting
« Reply #1 on: April 14, 2017, 11:02:32 PM »
Replace the bulbs with LED lights and leave the fixtures in place.
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Darrell Terry

  • BAC Member
  • *
  • Posts: 167
  • Thanked: 15 times
Re: Replace Vanity lighting
« Reply #2 on: April 15, 2017, 02:46:50 PM »
David & Steve,
The Brushed stainless steel base plate is rusting due to steam from shower. That is primary reason I wanted to replace.
Secondary is to switch to LED.
So far the LED bulbs I have seen on internet are not very attractive.
I have thought about refinishing the base but don't know where to get a Brushed SS finish or at what cost.
Darrell
2004 Monterey
350 Cummins ISC