Author Topic: Lug nut cover  (Read 2993 times)

Roy Lewis

  • Guest
Lug nut cover
« on: April 24, 2017, 03:46:32 PM »
Hi folks we have a 02 Marquis Tourmaline. I have a missing lug nut cover, does anyone know what size they are?

Lee Welbanks

  • Guest
Re: Lug nut cover
« Reply #1 on: April 25, 2017, 12:06:55 AM »
Go to any good truck stop and in the store you will find all the chrome you need. Might be hard to find just one or two most come in sets.

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3504
  • Thanked: 2689 times
Re: Lug nut cover
« Reply #2 on: April 25, 2017, 01:05:56 AM »
Roy,
I think they are 33 mm. You can remove one easily using channel locks and a rag to protect the finish.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

darell ottoson

  • Guest
Re: Lug nut cover
« Reply #3 on: April 25, 2017, 01:09:53 AM »
I checked all the truck stops in my area for the same thing plus some other parts for my wheel simulators. I found mine were made by Dicor @ www.dicor.com.
However I had better help and was able to get my parts at WWW.summitracing.com. For mine they are 10 stud, 2 hand holed, 22.5 inch wheels. Summit part number PHO-PN6256LNC for the lug nut covers. I think these parts are made by Phoenix. I was able to get left and right jam nuts and extenders there also. The covers were a little over $2 each. Theirs and the  phoenix usa websites are very helpful. Good luck Darell