« previous next »
Pages: [1]   Go Down

Author Topic: Fuses for brake,stop, and turn signals ?  (Read 2617 times)

Darrell Terry

  • BAC Member
  • *
  • Posts: 167
  • Thanked: 15 times
Fuses for brake,stop, and turn signals ?
« on: May 03, 2017, 03:46:43 PM »
Where are the 12 volt fuses located for RV lighting like turn signals, brake lights, and marker lights on a 2004 Monterey ?

Thanks in advance
Darrell
Logged
2004 Monterey
350 Cummins ISC

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3515
  • Thanked: 2698 times
Re: Fuses for brake,stop, and turn signals ?
« Reply #1 on: May 03, 2017, 05:26:42 PM »
Darrell,
I think your coach uses thermal circuit breakers rather than fuses. They are located in the electrical bay (front bay on driver's side). You can check that you are getting voltage on the appropriate terminal posts to the right of the circuit breakers.
Steve
Logged
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

Darrell Terry

  • BAC Member
  • *
  • Posts: 167
  • Thanked: 15 times
Re: Fuses for brake,stop, and turn signals ?
« Reply #2 on: May 04, 2017, 03:37:19 PM »
Thanks Steve,
 Was helping out a fellow Beaver owner in Redmond,OR. (03 Monterey)
Turned out his RV and car were wired by 2 different tech's in 2 different States and this was first time he connected both for towing.
 
Darrell
Logged
2004 Monterey
350 Cummins ISC
Pages: [1]   Go Up
« previous next »