« previous next »
Pages: [1]   Go Down

Author Topic: Aqua Hot quit  (Read 2928 times)

william harrison

  • Guest
Aqua Hot quit
« on: July 19, 2017, 06:22:41 PM »
 My Aqua Hot unit had worked very well (after installing a new control unit)
but when I took the coach out of storage July 9 (with fully charged batteries)
the Aqua Hot unit would not come on.  I turned the switch off for 10 minutes
then back on and nothing happened.  is there a master fuse on the board inside
the unit?  When it was working the motor would start well before ignition
but the motor does not turn on.

Chuck Harrison
03 Marquis
Akron, Ohio
Logged

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3511
  • Thanked: 2694 times
Re: Aqua Hot quit
« Reply #1 on: July 19, 2017, 06:57:09 PM »
Chuck,
Is it non-functional in Electric mode also? In any case, check the unit itself and see if any of the fault indicators are lit on the controller. Also use a toothpick or some other non-conductive probe to press the reset button. Sometimes they need to be reset after storage (???).
Steve
Logged
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1680
  • Thanked: 498 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Aqua Hot quit
« Reply #2 on: July 19, 2017, 07:23:34 PM »
It would help if you posted the model number of your AquaHot.  For example, mine is the AHE-100-02S, has no control board hanging on the AquaHot's inside wall, has several auto fuses, and resets simply by turning its on-off switch off and back on.  On our coach, the on-off switch is located on the wall above the aft end of the couch near the kitchen sink.
« Last Edit: July 19, 2017, 07:25:24 PM by David T. Richelderfer »
Logged
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!
Pages: [1]   Go Up
« previous next »