Author Topic: fault codes  (Read 3561 times)

Greg Ross

  • BAC Member
  • *
  • Posts: 46
  • Thanked: 16 times
fault codes
« on: August 08, 2017, 12:02:29 PM »
We are on the Maritines Ralley and I have a check engine light and a fault code of SPN 101 and FMI 18, does anyone know to read these codes or know where I can find a list of the codes.
Thanks
Greg & Barb Ross
2008 Contessa
C9S
2008 Contessa
C9 425HP

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: fault codes
« Reply #1 on: August 08, 2017, 01:58:16 PM »
Maybe here:  https://www.rbauction.com/digital_media/2012/2012314/attachment/8b/8b1c1c1b-3fb2-4e88-81d8-763dc7b3df5c.pdf

Or here:  https://www.rbauction.com/digital_media/2013/2013174/attachment/36/36ecb7ab-607c-4054-b861-c84f29ba6003.pdf
  (This one says SPF 111 & FMI 18 means low coolant level.)

I used these search criteria on Google - "Caterpillar fault code of SPN 101 and FMI 18"
« Last Edit: August 08, 2017, 02:13:20 PM by David T. Richelderfer »
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Dave Atherton

  • BAC Member
  • *
  • Posts: 1015
  • Thanked: 877 times
Re: fault codes
« Reply #2 on: August 09, 2017, 05:11:46 AM »
Greg, I have your engine codes  breakout for your Cat C-9 425 h.p. Your engine is setup
regeneration system. Will post them tomorrow on forum, still on road returning to
Quartzsite from Phoenix. Dave Atherton Retired Cat Mechanic

Dave Atherton

  • BAC Member
  • *
  • Posts: 1015
  • Thanked: 877 times
Re: fault codes
« Reply #3 on: August 09, 2017, 02:15:03 PM »
Greg, the SPN-FM codes break out. SPN 101 Low Oil Pressure Warning, FMI 18
Low Coolant Level. Dave Atherton Retired Cat Mechanic
The following users thanked this post: Greg Ross

Greg Ross

  • BAC Member
  • *
  • Posts: 46
  • Thanked: 16 times
Re: fault codes
« Reply #4 on: August 12, 2017, 11:09:36 AM »
Thanks for all the info on the Fault Codes, it seems the codes are a bad connection as pot holes in Newfoundland can turn the Check Engine Light on and off.

Greg & Barbara Ross
2008 Contessa
2008 Contessa
C9 425HP

Joel Ashley

  • BAC Member
  • *
  • Posts: 2341
  • Thanked: 801 times
  • OSU Class of '73, Oregon Native. RVing 39 years
Re: fault codes
« Reply #5 on: August 12, 2017, 11:14:14 PM »
Or perhaps marginally low coolant in the surge tank, sloshing sometimes below the sensor's level?
Joel and Lee Rae Ashley
Clackamas, Oregon
36.9 ft. 2006 Monterey Ventura IV, aka"Monty Rae"
C9 400HP Cat
The following users thanked this post: Greg Ross

Dave Atherton

  • BAC Member
  • *
  • Posts: 1015
  • Thanked: 877 times
Re: fault codes
« Reply #6 on: August 13, 2017, 06:05:17 AM »
Greg, Using diagnostic equipment ( Cat ET and Cummins Insite ) first thing that pops up
on diagnostic troubleshooting is what called an event code. Than I go over to see how many
occurance or count that has happen starting at the first and last occurrence. When there is
high count in short time frame and sometimes timer maxes out on sensor or other electronic
equipment. In most cases dirty or loose connection to sensor there is nothing wrong with the
part in question. Today many many failure are blamed to the electrical component and part
is changed out where in fact there nothing wrong with the part, and again frayed wire, loose
and or dirty connection. Dave atherton Retired Cat Mechanic
The following users thanked this post: Greg Ross