Latest problem: The slide rooms have stopped working (All four and the Gen slideout). When any of the buttons are pushed, the electric motor can be heard running, but the rooms work (a) slow (b)stutter or (c) don't move at all. When the room isn't moving, the motor spins free like it has no load on it. When it does move. the motor bogs down under the load.
In short, it is acting like its out of/low on fluid. I removed the cap on top of the reservoir and added about a quart of ATF, but this hasn't helped. If this pump was low, do I have to bleed the system to reprime it?