General Boards > Technical Support
Cat Engine Updates
Dennis Crawford:
Hello All,
I have a 2005 Monterey with the Cat C9 400HP. I have an issue uploading new Cat Engine software. The plug that is installed (plus interface wiring) can not handle the large updates. My dealer in Maryland had a workaround by using the interface between Cat and the Transmission. When I mentioned this to the my new Cat dealer in Florida (Ring) they never heard of this. They basically take the attitude that if they can not do it with what is there, they just won't do it. I think I may be several releases behind. Has anyone found a workaround for this.
Thanks,
Dennis
Richard And Babs Ames:
The connection may just not be as fast but able to handle any amount of information, just slower. The connector may need checking to see if it is OK.
Dennis Crawford:
Richard,
It just will not work. We have tried it in two places. The system will start sending the data, but will stop part way thru.
Dennis
Dick Reichelt:
I also have a 2005 monterey 400 cat and had the same problem.[slow download and complete stoppage]
I took it to Peterson Cat in Eugene, Or and they were able to resolve the download process.
It was awfully slow but successful.
Dick Reichelt
Dennis Crawford:
Dick,
The next time you take it to them, there is a faster way. I know this to be true because my Cat dealer in Maryland was able to do it by using the link at the transmission. My problem is that the folks in Florida (Ring Power) don't know about it and will not do anything that requires an extra step.
Dennis
Navigation
[0] Message Index
[#] Next page
Go to full version