Author Topic: Wireing on rear of the coach solenoid  (Read 2258 times)

Tom Chace

  • Guest
Wireing on rear of the coach solenoid
« on: November 02, 2017, 06:26:02 PM »
Hi everyone,


Can someone send me the correct wiring diagram to the rear of the coach solenoid in the battery box area??

I dropped a wire and am not sure where it goes.

Tom Chace

1999 Beaver Monterey
3126b CAT engine

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3515
  • Thanked: 2698 times
Re: Wireing on rear of the coach solenoid
« Reply #1 on: November 02, 2017, 08:09:38 PM »
Tom,
What does the labeling on the wire say? Also, it the picture is a "before" shot, can't you figure out where the loose wire goes?
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp

Tom Chace

  • Guest
Re: Wireing on rear of the coach solenoid
« Reply #2 on: November 02, 2017, 11:16:19 PM »

Steve,

Unfortunately that is not my picture

I think I have it by the eye size of the cable end

Strange thing is - It doesn't seem to go anywhere???
At "ON" position there is only juice on one side
At Start - exactly the same
At off - the same

A puzzlement for sure - but I do need to know what it is supposed to control - which I don't

Tom

1999 Beaver Montrey
3126 CAT

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3515
  • Thanked: 2698 times
Re: Wireing on rear of the coach solenoid
« Reply #3 on: November 02, 2017, 11:47:46 PM »
The wire will have a number or label on it. Let me know what it is and I can probably locate it in the wire lists.
Steve
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp