Setting coach tank calibration

[Michael Turnipseed]

Would appreciate any information on setting coach tank levels and tank calibration. When I attempt to reset levels the entered amounts keep flashing as if the tank level interface isn't responding.

[David T. Richelderfer]

Aladdin or Silverleaf?  We/I don't know your coach's year and model.

[Michael Turnipseed]

So sorry newbie mistake.  It's an Aladdin system on a 2003 Patriot Thunder Lexington.

[Bill Lampkin]

There is a procedure in the Aladdin manual. Basically, you have to set zero and span (tank empty, tank full). At empty, the sensor give a 5 digit # that you write down, then you fill the tank and write down that #. You go into Aladdin setup (need a code, its in the manual) and enter the values you have written down. I've got the manual here somewhere, I'll look for it and post it if I can find it.

[Joel Ashley]

Michael, in the Private Members Only section (scroll to Coach Assist) off the Home page here on the Forum you'll find links to a lot of useful documents, including Alladin items.
http://beaveramb.org/wp-content/uploads/2012/10/Aladdin-System-Users-Guide-05.pdf

Joel

[Michael Turnipseed]

Thanks for the info, last May BCS installed new sesensirs for the previous owners , so overwhelmed that I can’t honestly remember if they were working then. I know power / batteries were disconnected during some repair work but all other functions of the system are operating, so could that have cleared calibration? Do only service techs have the code?
Thanks

[Stan Simpson]

Do only service techs have the code? Thanks.

No, I have the code for mine written down in the manual. I think its the same code for everyone.

[Michael Turnipseed]

Hi Stan looked at all owners manuals that have made it to us but no code? Could you share when convienent.
Thanks Michael

[Stan Simpson]

Hi Stan looked at all owners manuals that have made it to us but no code? Could you share when convienent.
Thanks Michael

I think its 1818, but okay  , I will go outside and look.

[Stan Simpson]

Hi Stan looked at all owners manuals that have made it to us but no code? Could you share when convienent.
Thanks Michael

I think its 1818, but okay  , I will go outside and look.

I was wrong. The code is 1218. I have the calibration instructions. Let me know if you want me to scan them and email them to you. They are somewhat confusing to a new user. Bill Sprague walked me through mine when I did it.

[Joel Ashley]

Michael, it is indeed 1218.  But go to pg. 18 or 19 of the Aladdin troubleshooting guide in the Coach Assist section for guidance.
http://beaveramb.org/Data/PDF%20Manuals/Aladdin%20Troubleshooting.pdf

Joel

[Michael Turnipseed]

Thanks everyone I have downloaded the manual and now have the code I’ll let you all know how it goes  👍

[Michael Turnipseed]

Hello everyone thought I’d get back to you. Well I kept trying to find a prompt to enter the code , with nothing. So I thought I’d check out the basement and found a module not fully connected,Wahla it works . Retired pipe fitter not ecectrician guess ill learn
Thank you
Micheal