Generator shut dow when ac units start run

[George Frudakis]

start generator put both ac unites on, after a short time the generator stops running. start it a gain when both ac unites start the generator shut down and the start switch by the driver seat blinks.

[Gerald Farris]

George,
There is no way to tell what your problem is from your description, but the blinking light on the switch is displaying a fault code. So if you look at your Onan operator's manual for fault codes (page 30 in most manuals), you can determine what your fault code is and that will help determine if you have a generator problem or an A/C unit that is drawing too many amps and killing the generator.

Gerald

[George Frudakis]

thank you