Author Topic: Command Center Fixes?  (Read 2246 times)

Jason Worman

  • Guest
Command Center Fixes?
« on: October 09, 2018, 10:00:17 PM »
I feel bad with so many questions. So I have replaced all the house batteries, they all tested at anywhere between 12. And 12.9 volts. Inverer/charger tested as putting out 13 volts and working properly. When I turn on the command center it shows battery at 10.5 volts and needing to be charged, also it shows a draw from Leg A (Normal), Leg B (Normal) and also draw from VDC volts of 6-9 amps. This is while plugged into 50 amp shore power. Any way to reboot the command center or fix?

Jason

Steve Huber Co-Admin

  • Administrator Group
  • *
  • Posts: 3504
  • Thanked: 2689 times
Re: Command Center Fixes?
« Reply #1 on: October 09, 2018, 11:20:38 PM »
Jason,
Suggest you use a volt meter and check the actual voltage at the batteries prior to and when the C Center is showing the low volatge. Could be a bad connection to the C Center. The DC draw when on shore power could be your reefer. As Gerald noted in an earlier post, it requires 12v to run regardless of power source.
Steve
« Last Edit: October 14, 2018, 09:00:37 PM by Steve Huber Co-Admin »
Steve
2015-          07 Contessa Bayshore C9,  400 hp
2013-2015: 00 Marquis Tourmaline, C12, 425 hp
2005-2013: 01 Contessa Naples, 3126B, 330 hp