Generator exhaust extension

[Allen Hughes]

Any one added a generator exhaust extension without drilling holes in the coach to secure it?

[Mike Humble]

If you are talking about a Genturi to exhaust upwards, we secure it part way up with a bungee and a couple of suction cups attached to the drivers side window.
Mike

[Allen Hughes]

Thanks Mike, that is exactly what I am looking for.

[Roy Warren Co-Admin]

On our Genturi, I have to take the chrome tip off and then it fits onto the exhaust pipe.  I drilled to holes into the exhaust pipe to hold it in place with a 3 inch screw thru the genturi and the exhaust pipe.  I also use plumber's tape to help hold the weight so that it won't cause damage to where the exhaust pipe connects to the generator.
Roy Warren

[Dan Murphy]

Allen you may want to look at this product


http://gostikproducts.com/model-gostack/

[Jerry Carr]

Allen we did ours with suction cups/Bungee  it worked well but I did drill a hole and used a locking pin

[Neal E Weinmann]

CAMCO makes a suction cup set that replaces the original anchors. The model number is 44850. I have been using them with generally positive results. Like any suction cup device, a clean surface is necessary.