« previous next »
Pages: 1 [2]   Go Down

Author Topic: Water Pump Replacement Question  (Read 4667 times)

Frank Bergamo

  • BAC Member
  • *
  • Posts: 282
  • Thanked: 73 times
Re: Water Pump Replacement Question
« Reply #15 on: June 18, 2018, 10:58:48 PM »
Norm, this is the valve that you will need. https://www.zoro.com/asco-solenoid-valve-brass-nc-air-inert-gas-8210g002/i/G0446747/ It has an operating pressure of 100 PSI. The earlier valves were only 40 PSI operating pressure. This is the setup that I have, with the Remco 55ARV pump and it has worked flawlessly. Hope this helps.
Logged
Frank & Paulette Bergamo
2019-       : 2007 Marquis Topaz IV  C-15 600 HP Allison 4000
2014-2019: 2002 Marquis Emerald C-12 505 HP Allison 4000
2004-2014: 1986 Executive Diplomat 3208 250 HP Allison MT-643
Grand Junction, CO.
Pages: 1 [2]   Go Up
« previous next »