Author Topic: Looking for diagnostic port  (Read 2349 times)

Bill Staley

  • Guest
Looking for diagnostic port
« on: July 05, 2018, 04:57:38 PM »
Good morning all.  Hope everyone had a great 4th.  I am looking to install the Silver leaf VMSpc on our '05 PT Richmond 42' with the C13 525 hp engine.  Trying to find the Diagnostic port that will need to be connected to the VMSpc system.  Any ideas where it should be.   Haven't found it around the steering column.  Wondering if it may be in the engine compartment.  And if so, how to connect it.

Mike Shumack

  • Guest
Re: Looking for diagnostic port
« Reply #1 on: July 05, 2018, 07:11:01 PM »
Do you have a removable panel on your dash?
If so, there should be a metal plate just under the panel with the diagnostic connecter.
There is another diagnostic connector located at the battery bank compartment.

Dave Atherton

  • BAC Member
  • *
  • Posts: 1015
  • Thanked: 877 times
Re: Looking for diagnostic port
« Reply #2 on: July 06, 2018, 01:18:53 PM »
Bill,
The data port is sometime confusing as there are two side by side and many times not marked. You will see a 6 pin, sometime marked J-1708 and a 9 pin J-1939. In most cases the data Port you want is the 6 pin J-1708. The other is 9 pin j-1939 which is the Allison transmission data port.  Toward the end when Caterpillar stopped supplying engines in motorhome they started using a 9 pin J-1939 data connector.
Dave Atherton Retired Cat Mechanic.
« Last Edit: July 06, 2018, 05:55:09 PM by Steve Huber Co-Admin »

Larry Dedrick

  • BAC Member
  • *
  • Posts: 172
  • Thanked: 51 times
Re: Looking for diagnostic port
« Reply #3 on: July 16, 2018, 05:35:26 PM »
Bill
          Your gonna Love that Silverleaf, once you find your diagnostic port. If you have any questions building your gauges feel free to contact me, 386-562-7044

         Larry Dedrick
Laura/Larry Dedrick
Ormond Beach, FL
2008 Beaver Marq. Amethyst
Cat C15