Author Topic: Need Door Handle  (Read 7163 times)

Bob Bulot

  • Guest
Need Door Handle
« on: July 15, 2018, 06:19:03 PM »
The Black square door handle on the outside of the entry door is startling to crack. Can anyone tell me who makes ( made?) it, or where I can get one?

Jerry Emert

  • BAC Member
  • *
  • Posts: 1077
  • Thanked: 193 times
Re: Need Door Handle
« Reply #1 on: July 15, 2018, 06:35:11 PM »
I bought one from Monaco a couple of years ago.  I've heard they aren't so easy to deal with after REV bought them though.  They appear to be pretty generic.  Camping World or an RV place will probably have one.
Jerry, Chief USN Retired
2003 Patriot Thunder Lexington 40' 3 Slides
C-12 Ser#  2KS89983
4000MH

Mike Shumack

  • Guest
Re: Need Door Handle
« Reply #2 on: July 15, 2018, 09:53:34 PM »
I bought a replacement for my '05. It is a TriMark handle. I'll see if I can find the receipt (Seller) in case you have the same one.

Does this look like your handle? http://www.trimarkcorp.com/en/zPlatform.aspx?platformid=14&categoryid=12

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1676
  • Thanked: 497 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Need Door Handle
« Reply #3 on: July 15, 2018, 11:55:20 PM »
We had to replace the door handle a few years ago too.  TriMark rings a bell.  We got the new replacement from BCS in Bend.
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Dan Murphy

  • Guest
Re: Need Door Handle
« Reply #4 on: July 16, 2018, 12:48:51 AM »
We needed a new handle and locking mechanism several years back and I called Mike at Beaver Coach Sales and he found me an exact match for my coach.

Bob Bulot

  • Guest
Re: Need Door Handle
« Reply #5 on: July 16, 2018, 12:41:57 PM »
Does this look like your handle? http://www.trimarkcorp.com/en/zPlatform.aspx?platformid=14&categoryid=12

Yes, Mike.  That’s the one.  I’ll call them this AM.  Thanks to all!


Mike Shumack

  • Guest
Re: Need Door Handle
« Reply #6 on: July 16, 2018, 01:12:37 PM »
I'm pretty sure I did not buy directly from TriMark - but I have not found my receipt yet. It seems to me that the manufacturers usually charge more than third-party retailers. A third-party retailer may sell cheaper because this is "old stock". You could try Googling "TriMark 030-0450".

In the case of this door handle, the link I provided says that handle has been replaced with a newer model (030-1450) (more rounded edges). If that newer model fits the opening nicely (covers the unpainted edges around the opening), then you may want to consider going with the newer model.  I think it is better looking and it may have some internal improvements.

Bob Bulot

  • Guest
Re: Need Door Handle
« Reply #7 on: July 16, 2018, 08:21:47 PM »
Just had a conversation with a woman in TriMark sales.  She insists that “030-0450’ is a series number and that there are many handles in that series.  She wanted a part number.  she insists that I would have to photo the back of the door handle before she could send me a part.  If you happen to find your receipt, I would appreciate the part number, if you can find it..

Mike Shumack

  • Guest
Re: Need Door Handle
« Reply #8 on: July 16, 2018, 11:36:09 PM »
Bob,
the handle I bought is TriMark p/n 13438-04.  The invoice description is "TriMark RV Door Lock 13438-04, Black"
I got it from PRVParts www.PRVPart.com on 12/28/17 for $41.00 (order #55671 in case that helps). 
Good luck
The following users thanked this post: Mike Tomas

Bob Bulot

  • Guest
Re: Need Door Handle
« Reply #9 on: July 17, 2018, 09:33:59 PM »
Bob,
the handle I bought is TriMark p/n 13438-04.  The invoice description is "TriMark RV Door Lock 13438-04, Black"
I got it from PRVParts www.PRVPart.com on 12/28/17 for $41.00 (order #55671 in case that helps). 
Good luck

Can’t thank you enough Mike. 
The following users thanked this post: Doug Till

Doug Till

  • BAC Member
  • *
  • Posts: 19
  • Thanked: 9 times
Re: Need Door Handle
« Reply #10 on: May 27, 2019, 09:28:46 PM »
Mike,

My door latch was getting very hard to open the door the last month. I glad I found your post! I purchased the door latch directly from TriMark. It was the exact door latch for my coach. Thank you.
Doug & Sarah Till
40' 2003 Marquis-Ruby, C12 505 HP

Michael Hannan

  • BAC Member
  • *
  • Posts: 39
  • Thanked: 1 times
Re: Need Door Handle
« Reply #11 on: April 08, 2022, 12:31:09 AM »
This topic is a few years old but I'd like to ask if the handle described is compatible with a door with latches at the top and bottom.  I need a new handle but I also see there is a TriMark 030-1450 2 point handle.  I want to be sure to order the correct one.  BCS quoted me a price of $170 which is much more than a TriMark (the original part manufacture) with shipping on top of that.

Thanks

MJ

Bob,
the handle I bought is TriMark p/n 13438-04.  The invoice description is "TriMark RV Door Lock 13438-04, Black"
I got it from PRVParts www.PRVPart.com on 12/28/17 for $41.00 (order #55671 in case that helps). 
Good luck

Can’t thank you enough Mike.
2003 Marquis Ruby
505hp C12

Gene Obie

  • BAC Member
  • *
  • Posts: 140
  • Thanked: 33 times
Re: Need Door Handle
« Reply #12 on: April 08, 2022, 06:01:10 AM »
I replaced the latch on my coach with TriMark RV Door Lock 22660-04 (Replacement for 13438-04) and it does control  top and bottom latches. I also decided just to cut an access hole (and install a plug) to have access to the latch mechanism and to avoid having to pull the door apart to replace. More info in this post.

https://beaveramb.org/forum/index.php/topic,10377.msg72075.html#msg72075
-Gene

2005 Beaver Marquis, Ruby 40, C-13 Cat 525HP, Allison 4k
Towing 2018 F-150
Washington
The following users thanked this post: Michael Hannan

Bryan Beamon

  • BAC Member
  • *
  • Posts: 361
  • Thanked: 133 times
Re: Need Door Handle
« Reply #13 on: April 08, 2022, 03:58:42 PM »
I recently replaced my entry door handle and found a new u tube video on how to properly adjust the upper and lower latches very informative as it is easy to over tighten these latches. The video is for a 2007 Monaco Dynasty.
C & Bryan Beamon
2006  to present
2007 Contessa 42ft Cat C-9 400hp
1996 to 2006 97 Beaver Patriot Camden
The following users thanked this post: Michael Hannan

Michael Hannan

  • BAC Member
  • *
  • Posts: 39
  • Thanked: 1 times
Re: Need Door Handle
« Reply #14 on: April 08, 2022, 04:35:06 PM »
Thanks so much Gene & Bryan!

MJ
2003 Marquis Ruby
505hp C12