Author Topic: Puck lights  (Read 1701 times)

Mark Beavin

  • BAC Member
  • *
  • Posts: 78
  • Thanked: 1 times
  • 602-448-1434
Puck lights
« on: February 02, 2019, 03:35:32 PM »
My puck lights don't work over the couch or in bedroom. Checked the fuses, no problem, switches ok, bulbs ok and getting 3 volts with switch out and jumper wire to wire. What could be wrong?
Mark Beavin  Judi Binderman
FMC 491464
1996 Beaver Monterey 30'
3126 Cat Diesel 250 HP

Mike Shumack

  • Guest
Re: Puck lights
« Reply #1 on: February 02, 2019, 03:46:25 PM »
You should be getting 12V at the puck. Double check your meter's ground connection. Test at another working light to verify.

Also, are you getting 12V at the "incoming" side of the switch (supply side) with switch in off position? If no, then problem is before the switch. If you are getting 12V to the switch and then when you turn it on and measure the output side of switch (load side), if that's where your reading 3V, then problem is on that side of the circuit.
« Last Edit: February 03, 2019, 04:13:43 PM by Mike Shumack »
The following users thanked this post: Mark Beavin