« previous next »
Pages: [1]   Go Down

Author Topic: Entry door hinge  (Read 4859 times)

Marty and Suzie Schenck

  • Guest
Entry door hinge
« on: December 23, 2019, 02:44:11 AM »
Other than Beaver Coach Sales, since my 2004 Patriot Thunder is a Monaco product, can anyone direct me to a place where I could find a new upper entry door hinge. Thanks, Marty
Logged

Neal E Weinmann

  • BAC Member
  • *
  • Posts: 100
  • Thanked: 34 times
Re: Entry door hinge
« Reply #1 on: December 23, 2019, 05:21:45 AM »
Do you perhaps mean the door check that holds the door open? Monaco parts are available thru the REV Group:

https://www.revgroup.com/rev-group-specialty-vehicle-parts-online
Logged
2005 Monterey Bayview IV
CAT C9 400HP
2018 Ford Edge Titanium

Bill Sprague

  • Guest
Re: Entry door hinge
« Reply #2 on: December 23, 2019, 04:53:40 PM »
I read about this place a week or so ago.  It is supposed to be the biggest RV salvage yard in the country.  Maybe they have hinges?

https://rvparts.visonerv.com/

https://rvlove.com/2019/06/05/where-rvs-go-to-die-fires-crashes-blowouts-what-we-learned-at-an-rv-salvage-yard/
Logged

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1680
  • Thanked: 498 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Entry door hinge
« Reply #3 on: December 23, 2019, 05:19:37 PM »
Logged
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Frank Bergamo

  • BAC Member
  • *
  • Posts: 282
  • Thanked: 73 times
Re: Entry door hinge
« Reply #4 on: December 23, 2019, 05:33:16 PM »
Marty, make sure you measure the length and the width of your swing arm assembly. I just replaced my assembly and got it from the web site in David's post. They make a 1" and a 1.25" wide assembly. Mine is the 1" one on the 2007 Marquis. Hope this helps.
Logged
Frank & Paulette Bergamo
2019-       : 2007 Marquis Topaz IV  C-15 600 HP Allison 4000
2014-2019: 2002 Marquis Emerald C-12 505 HP Allison 4000
2004-2014: 1986 Executive Diplomat 3208 250 HP Allison MT-643
Grand Junction, CO.

Roy C Tyler

  • Guest
Re: Entry door hinge
« Reply #5 on: December 23, 2019, 09:31:17 PM »
If it is the strut you need, you can always try this solution:       https://bsehlin.wordpress.com/entry-door-strut/   
Logged

Andrew Shoen

  • BAC Member
  • *
  • Posts: 45
  • Thanked: 2 times
Re: Entry door hinge
« Reply #6 on: December 23, 2019, 10:33:55 PM »
I am curious why you don't get it from BCS? Price? Location? Boycott?

I was there last month and they had it in stock and replaced in 20 min. They also replaced the plastic clip that connects and holds the screen door to the main door.


Logged
2006 Beaver Monterey Pacifica
C9

Neal E Weinmann

  • BAC Member
  • *
  • Posts: 100
  • Thanked: 34 times
Re: Entry door hinge
« Reply #7 on: December 24, 2019, 12:31:32 AM »
In response to Bill Sprague’s suggestion of finding a used piece, the most common failure of the door check is the loosening of the pivot such that there is too much play between the arms. Because of that play, the interference lock fails to engage and the door will not be kept open. Beyond limiting the door swing, that stay is an important function.
« Last Edit: December 24, 2019, 01:01:58 AM by Neal E Weinmann »
Logged
2005 Monterey Bayview IV
CAT C9 400HP
2018 Ford Edge Titanium

David T. Richelderfer

  • David, Leslie, Jasper, & JoJo
  • BAC Member
  • *
  • Posts: 1680
  • Thanked: 498 times
  • OSU, Class of 1971, RVing nearly 50 years
Re: Entry door hinge
« Reply #8 on: December 24, 2019, 02:46:37 AM »
Logged
2004 Beaver Marquis Sapphire

I had a dream... then I lived it!

Marty and Suzie Schenck

  • Guest
Re: Entry door hinge
« Reply #9 on: December 24, 2019, 09:11:58 PM »
It is the hinge I need and not the door stop. The door is so heavy and no way to lube the hinge so the pivot pin and hinge are wearing and the door is sagging.
I said other than Beaver Coach Sales because when I first contacted them they kinda doubted they could find one. They contacted me today and said they think they found one. I hope so.
Thanks for the replies,
Marty
Logged
The following users thanked this post: Andrew Shoen

Larry Fritz

  • BAC Member
  • *
  • Posts: 59
  • Thanked: 24 times
  • 98 Patriot Ticonderoga - 37' Blue/White, 3126B CAT
Re: Entry door hinge
« Reply #10 on: December 25, 2019, 10:19:24 PM »
If that did not work, call me at (408) 515-5957.  I think I know who made the original door assembly.  ( I will dig out the info only if you have not found another source.


Larry (98 Patriot)
Logged
Larry Fritz
Pages: [1]   Go Up
« previous next »