Author Topic: Racor retrofit kit  (Read 2074 times)

Adam Hicklin

  • Guest
Racor retrofit kit
« on: May 26, 2020, 11:23:40 PM »
I’m swapping out old rancor primary filter with the new retrofit kit. Seems pretty straight forward but the new wiring harness has one lead to the water probe and the other is supposed to onnect to the “engine ground harness”. Current filter assembly only has one lead to the water probe, that I can see.  What do I do with the second wire? 
Thanks for the help

Bill Lampkin

  • BAC Member
  • *
  • Posts: 1230
  • Thanked: 359 times
Re: Racor retrofit kit
« Reply #1 on: May 26, 2020, 11:32:11 PM »
I would thnk any good ground location close by would work. YOu might even find a mating connector at NAPA or other parts store.
2005 Patriot Thunder Lexington, 3 slides
40' tag axle (short wheelbase)
525 hp C13

"Goin where the weather suits my clothes..."