Author Topic: Replace TV in drop down  (Read 2981 times)

David Sacks

  • BAC Member
  • *
  • Posts: 12
  • Thanked: 1 times
Replace TV in drop down
« on: May 23, 2020, 01:25:10 AM »
I want to replace the original TV with the largest one I can. The TV which I’d like to use nearly touches the hole to manually raise/lower TV. I don’t think I have a tool (will get one) but if there is any offset which would need clearance on the tool, I would opt for a smaller one. Does anyone have a picture of the tool or know if it needs clearance. Thanks, DS
David Sacks
David@SacksTeam.com
214-683-3957
2008 Beaver Patriot Thunder Brandywine IV
45', 4 Slides, 525 C-13 Cat
2013 F150 FX4

Lee Welbanks

  • Guest
Re: Replace TV in drop down
« Reply #1 on: May 24, 2020, 02:29:04 AM »
What lift system did they use for your 08 model, my 06 Patriot Thunder uses a shaft with a bend hook on the end and a drill motor to crank it up or down. I would not cover that access hole, because as sure as you do you system will fail., been there done that.