BAC Forum
General Boards => Technical Support => Topic started by: Dave Parks on October 08, 2015, 05:03:34 PM
-
All push lights are on. Allied help says need new unit. How is it installed?
Beaver 06 monterey
-
Looks simple enough to me. Just unplug the connectors, unscrew the Controller off the wall, screw on the new one, and plug the connectors in. I don't know what you've tried so far, but before buying a new Controller, I'd first at least pull and replace the power connector (+12v and PWR GND) to see if it reboots.
-Joel