1
Technical Support / Re: Load shedding
« Last post by Eric Maclean on May 02, 2024, 12:26:06 PM »Bill
To my knowledge Beaver never used a load shedding device on there shore power management I may be wrong on this but of all the wiring diagrams I've looked through I've yet to find one .
Winnebago and a couple other manufacturers have used load shedding in the past ,most of these systems where made by intellitech and would have a display panel like the one showed in the link below.
The user could preset an amp limit and the system would keep the load balanced below that set limit by turning power off preselected loads like a/c units or clothes dryer to keep the amp draw at the shore cord below the preset threshold.
Intellitech also marketed a unit that would control two A/C units shedding power back and forth to allow both A/C units run run on a 30 amp shore pedestal.
https://www.google.com/search?q=intelatec+load+shedding&oq=intelatec+load+shedding+&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIJCAEQIRgKGKABMgkIAhAhGAoYoAEyCQgDECEYChigATIJCAQQIRgKGKAB0gEJMTY3MjZqMGo4qAIUsAIB&client=tablet-android-walmart-terr1-rso1&sourceid=chrome-mobile&ie=UTF-8#vhid=ZdWt2YhlvdX8vM&vssid=l&ip=1
Hope this helps
Eric
To my knowledge Beaver never used a load shedding device on there shore power management I may be wrong on this but of all the wiring diagrams I've looked through I've yet to find one .
Winnebago and a couple other manufacturers have used load shedding in the past ,most of these systems where made by intellitech and would have a display panel like the one showed in the link below.
The user could preset an amp limit and the system would keep the load balanced below that set limit by turning power off preselected loads like a/c units or clothes dryer to keep the amp draw at the shore cord below the preset threshold.
Intellitech also marketed a unit that would control two A/C units shedding power back and forth to allow both A/C units run run on a 30 amp shore pedestal.
https://www.google.com/search?q=intelatec+load+shedding&oq=intelatec+load+shedding+&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIJCAEQIRgKGKABMgkIAhAhGAoYoAEyCQgDECEYChigATIJCAQQIRgKGKAB0gEJMTY3MjZqMGo4qAIUsAIB&client=tablet-android-walmart-terr1-rso1&sourceid=chrome-mobile&ie=UTF-8#vhid=ZdWt2YhlvdX8vM&vssid=l&ip=1
Hope this helps
Eric