21
Technical Support / Re: Hydraulic pump leak
« Last post by Frank Bergamo on April 23, 2024, 04:22:52 PM »Yes, disconnect the supply line nut from the swivel fitting, holding the swivel fitting with a wrench as you are loosing the supply line fitting. This keeps it from twisting and possibly breaking off. After the supply line fitting is off, then loosen the nut up against the pump housing and remove fitting from housing. As far as fluid leaking out, you will probably loose some, have a pan ready and possibly something to plug the ends. Hope this helps, good luck! This is what you have, https://www.discounthydraulichose.com/6801-06-06-38-jic-male-x-6-saeorb-male-90.html?gad_source=1&gclid=CjwKCAjwuJ2xBhA3EiwAMVjkVKvt6Ae8TIYh97B7nKLLa-9TdBe8eLwgHb0MiwKA25iaj_qrDhVWbhoCTOQQAvD_BwE